-
- DC Brush Motor, DC Motors & Wheels
DC Motor 6V
- ৳115.00
- Rated voltage (V): 6 Rated speed (r / min): 10000 Rated voltage (V): 6 Rated speed (r / min): 20000
- Add to cart
-
- DC Motors & Wheels, Water Pump
DC12V Water Pump Motor
- ৳210.00
- DC 12V Water Pump Motor 700L/H Power:16.8W Max Flow Rate: 700 L/H Max Water Head: 5M Max Circulating Water Temperature: 60°C Specification: - Material: ABS(Acrylonitrile Butadiene Styrene) + Stainless Steel - Overall Size: Approx. 80 x 48 x 63mm/3.15 x 1.89 x 2.48'' - Pump Inlet Diameter: 16mm(Outer), 12mm(Inner) - Pump Outlet Diameter: 12mm(Outer), 6.9mm(Inner) - Inlet/Outlet: 1/2" male thread…
- Add to cart
-
- DC Gear motor
DC3-12V N20 200rpm Gear Motor & Mount Bracket & 43mm Wheel
- ৳475.00
- Specification: N20 Gear Motor: Shaft diameter: 3MM, D-axis Shaft length: 10MM Voltage: 6V (range: 3-12V) No-load speed: 60RPM / 100RPM Torque: 60RPM = 1KG.CM; 100RPM = 0.4KG.CM Rubber tire: Diameter: 43MM Thickness: 19MM Aperture: D type 3MM Material: imported rubber + ABS engineering plastics N20 Motor mounting bracket: Material: ABS Fixing hole: 4mm Fixing hole center distance: 27mm Length: 24mm
- Add to cart
-
- Sale!
- ACTUATOR'S & ACCESSORIES, DC Brush Motor, DC Motors & Wheels, Robots, Wheel
DC3-12V N20 300rpm Gear Motor & Mount Bracket & 43mm Wheel
- Original price was: ৳599.00.৳549.00Current price is: ৳549.00.
- Specification: N20 Gear Motor: Shaft diameter: 3MM, D-axis Shaft length: 10MM Voltage: 6V (range: 3-12V) No-load speed: 60RPM / 100RPM Torque: 60RPM = 1KG.CM; 100RPM = 0.4KG.CM Rubber tire: Diameter: 43MM Thickness: 19MM Aperture: D type 3MM Material: imported rubber + ABS engineering plastics N20 Motor mounting bracket: Material: ABS Fixing hole: 4mm Fixing hole center distance: 27mm Length: 24mm
- Add to cart
-
- Motor Controller Module
DRV8825 Purple Stepper Motor Driver
- ৳235.00
- Simple step and direction control interface Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Can interface directly with 3.3 V and 5 V systems Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout Short-to-ground and shorted-load protection 4-layer, 2 oz copper PCB for improved heat dissipation Exposed solderable ground pad below the driver IC on the bottom of…
- Add to cart
-
- CNC/3D Printer, Motor Controller Module
DRV8825 Stepper Motor Driver Module
- ৳220.00
- Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm.
- Add to cart
-
- DC Gear motor, DC Motors & Wheels
High Torque Gear Motor 12V 100RPM 25GA
- ৳815.00
- Voltage: 12V DC RPM:100RPM Diameter: 25mm Low Noise Shaft equips metal bushes for long life. Metal Gears for High performance It comes with High-Quality gears. High torque at very low Current Consumptions Dishan Tech BD.
- Add to cart
-
- Arduino Shield & Module, Motor Controller Module
L-298P Motor Driver Expansion Board
- ৳520.00
- Features: L298P dual-end full-bridge drive chip can be used to independently drive two dc, stepper motor or relay at the same time. The current value of the motor can be measured in real time. Fully compatible with Arduino UNO R3, laminated plug-in design, direct reading of current through analog IO. compatible with TinkerKit, can be directly inserted with it.
- Add to cart
-
- Basic Components, Digital ICs, Motor Controller Module
L293D Dual H-bridge
- ৳119.00
- Maximum Supply Voltage: 36 V Maximum Logic Supply Voltage: 36 V Maximum Input Voltage: 7 V Maximum Enable Voltage: 7 V Peak Output Current (100 ms non-repetitive): 1.2 A Total Power Dissipation at 90°C: 4 W Storage and Junction Temperature: – 40 °C to 150 °C
- Add to cart
-
- Motor Controller Module
L293D Dual Motor Driver Module
- ৳245.00
- Model: L293D Brand: China
- Add to cart
-
- Arduino Shield & Module, Motor Controller Module
L293D Motor Driver Module
- ৳320.00
- New L293D motor shield, the input voltage DC4.5-25V 600mA output current capability per channel 1.2A peak output current(non-repetitive) per channel Enable facility Overtemperature protection Logical “0” input voltage up to 1.5V(High noise immunity)
- Add to cart
