6V Mini Water Pump Motor

Description

6V Mini Water Pump Motor

• Voltage: DC 2.5-6V
• Working Current: 130-220mA
• Power: 0.4-1.5W
• Maximum lift: 40-110cm / 15.75″-43.4″
• Flow rate: 80-120L/H
• Driving mode: brushless dc design, magnetic driving
• Continuous working life for 500 hours
• Outside diameter of water outlet: 7mm
• Inside diameter of water outlet: 4.5mm
• Outside diameter of water inlet: 6.8mm
• Inside diameter of water inlet: 4.5mm
• Diameter: Approx. 24mm / 0.95″
• Length: Approx. 56mm
• Height: Approx. 33mm
• Material: Engineering plastic
• Color: Beige (not fully white)

Note:

1. When diving the water pump into the water, the water level is higher than the pump. The low level of the water will cause the temperature too high, so the noise of the pump will be large.
2. Land use need to allow water to flow into the pump (non-self-priming pump), the installation of water level higher than the pump.
3. To keep the water clean, so as not to block the pump rotor. the pump should be cleaned regularly to keep the pump clean.
4. There may be 1-3mm of size deviation due to manual measurement.
5. There may be a little color difference due to display pixel and light.

[N.B: A pipe at front may or not be present. Depends on manufacturer.]