Ai-Thinker RA-02
৳695.00
Specifications
-
433MHz Average Operating Current TX: 93mA RX: 12.15mA Standby: 1.6mA
-
Best suited for long range Internet of Things application
-
Can be used with Arduino, Raspberry Pi, ARM, PIC etc. – Supports half-duplex SPI communication
-
Color: Multicolor
-
LoRa Spread Spectrum modulation technology
-
Constant RF power output at + 20dBm-100mW voltage change
-
High sensitivity: down to -148dBm
-
Half-duplex SPI communication
-
Programmable bit rates up to 300kbps
-
Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
127dB RSSI dynamic range -
Automatic RF signal detection, CAD mode and very high speed AFC
-
Packet engine with CRC up to 256 bytes
-
Small footprint dual-row stamp-hole patch package
-
Shielded housing
Description
Ai-Thinker RA-02
Description
Ra-02 is a wireless transmission module based on SEMTECH’s SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has a strong ability of anti-jamming and has the function of air wake-up Consumption. Can be covering thousands of people in the district environment, particularly suitable for meter reading, smart home, burglar alarm equipment. The LoRa series module Ra-01 is designed and developed by AI-THINKER Technology. The SX1278 RF module is mainly used for long-range spread spectrum communication. It can resist Minimize current consumption. Thanks to SEMTECH’s patented LoRa modulation technology, the SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, a long transmission distance and high reliability. At the same time, compared with the traditional modulation technology, LoRa modulation technology has obvious advantages in anti-blocking and selection, which solves the problem that the traditional design scheme can not consider the distance, interference and power consumption at the same time.
Specifications
-
433MHz Average Operating Current TX: 93mA RX: 12.15mA Standby: 1.6mA
-
Best suited for long range Internet of Things application
-
Can be used with Arduino, Raspberry Pi, ARM, PIC etc. – Supports half-duplex SPI communication
-
Color: Multicolor
-
LoRa Spread Spectrum modulation technology
-
Constant RF power output at + 20dBm-100mW voltage change
-
High sensitivity: down to -148dBm
-
Half-duplex SPI communication
-
Programmable bit rates up to 300kbps
-
Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
127dB RSSI dynamic range -
Automatic RF signal detection, CAD mode and very high speed AFC
-
Packet engine with CRC up to 256 bytes
-
Small footprint dual-row stamp-hole patch package
-
Shielded housing
Reviews
There are no reviews yet.