Anemometer / Wind Speed Measurement Sensor 0-5V

Description

The three Cups type Wind Speed Sensor Voltage Type(0-5V) Anemometer Kit is an instrument that can measure the wind speed. It is composed of shell, the wind cup, and the circuit module. Photovoltaic modules, industrial microcomputer processor, the current generator, electric current and so on are integrated into the internal drive.Dishan Tech BD.

The materials of sensor shell and wind Cups are the aluminum alloy which uses the special mold precision casting technology, the size of the tolerance is very small. The precision of the surface is very high, and the internal circuit has been protection processing, the sensor has high strength, weather resistance, corrosion resistance and waterproof. Dishan Tech BD. Featured By Dishan Tech BD.

The plug of the cable is a military plug, it has a good anticorrosive and prevents erosion performance that it can ensure the instrument used for a long time, at the same time, In the case of using relevant specifications that ensure the accuracy of the wind speed acquisition.

The material of the circuit PCB is the military-grade A which ensure the stability of the parameters and the quality of the electrical properties; Electronic components are all industrial chip which makes overall has extremely reliable electromagnetic interference resistance and can ensure that the host can work normally in – 20 ℃ ~ + 50 ℃, humidity 35% ~ 85% (condensation).

This product can be widely used in engineering machinery (crane, crawler crane, door crane, tower crane, etc.), railways, ports, docks, power plants, meteorological, cableway, the environment, greenhouse, breeding, air conditioning, energy monitoring, agriculture, health, clean room areas such as wind speed measurement, and the corresponding signal output.

Dishan Tech BD brings you the anemometer sensors, its wind speed was judged by adopting the output voltage signal (0 to 5 v), users can easily read the level of wind speed by our instruction and sample code.Dishan Tech BD.

Please make the external power (DC 9-24V) and the wiring to Arduino in the same ground, i.e. connect GND to Arduino as well as to external power’s GND. In the diagram, it was not indicated out. Dishan Tech BD. Featured By Dishan Tech BD.

Note: This Anemometer produce voltage Output in the range of 0 to 5 V DC according to the speed of the wind.

Product Images are shown for illustrative purposes only and may differ from the actual product.

Connection:

1. Red ↔ +9-24V
2. Black ↔ GND
3. Yellow ↔ Voltage signal
4. Blue ↔ Current signal

Pin Description:

Features :

1. High hardness
2. Corrosion protection
3. Waterproofness
4. High precision
5. Dimensions:

• Cups Outer Diameter: 50 mm.
• Body Outer Diameter: 39 mm.
• Base Diameter: 60 mm.
• Screw Hole Diameter: 7 mm.

Featured Dishan Tech BD.

General Specification
Rated Supply voltage (V)	12 – 24 V DC
Power consumption	Voltage MAX ≤ 0.3W
Output signal range (V)	0 – 5
Operating Current (mA)	4-20
Start wind speed (m/s)	0.4 – 0.8
Resolution (m/s)	0.1
Effective measurement range	0-30m/s
System error	±3%
Transmission distance (m)	< 1000
Max Wind Speed	70m/s
Working temperature (℃)	-40 ~ +80
Shipment Weight	0.8 kg
Shipment Dimensions	24 × 22 × 20 cm

Please allow 5% measuring deviation due to manual measurement.

Please make the external power (DC 9-24V) and the wiring to Arduino in the same ground, i.e. connect GND to Arduino as well as to external power’s GND. In the diagram, it was not indicated out.

Featured By Dishan Tech BD.

Sample Code:

/*

Connect the voltage signal wire to Arduino analog interface:

Yellow Cable<—->A0

*/

void setup()

{

Serial.begin(9600);

}

void loop()

{

int sensorValue = analogRead(A0);

float outvoltage = sensorValue * (5.0 / 1023.0);

Serial.print(“outvoltage = “);

Serial.print(outvoltage);

Serial.println(“V”);

int Level = 6*outvoltage;//The level of wind speed is proportional to the output voltage.

Serial.print(“wind speed is “);

Serial.print(Level);

Serial.println(” level now”);

Serial.println();

delay(600);

}

Featured By Dishan Tech BD.

Package Includes :

1 x Anemometer/Wind Speed Measurement Sensor 0-5V

What is the price of Anemometer/Wind Speed Measurement Sensor 0-5V in Bangladesh?

The latest price of Anemometer/Wind Speed Measurement Sensor 0-5V in Bangladesh is BDT 2,580 You can buy the Anemometer/Wind Speed Measurement Sensor 0-5V at best price from our Dishan Tech BD.or visit Dishan Tech BD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product   Dishan Tech BD.