Current Sensor ACS712-5A

Description

The 5A range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage. Dishan Tech BD.

Sensing and controlling current flow is a fundamental requirement in a wide variety of applications including, over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc.  Featured By Dishan Tech BD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BDDishan Tech BD.

This ACS721 current module is based on the ACS712 sensor, which can accurately detect AC or DC current.

The maximum AC or DC that can be detected can reach 5A, and the present current signal can be read via analog I / O port of Arduino.

Note: ACS712 is based on the Hall detection principle, please try to avoid the magnetic field, when using it as it may impact the reading accuracy.Dishan Tech BD.

Features :

1. The low-noise analog signal path
2. Device bandwidth is set via the new FILTER pin
3. 5 µs output rise time in response to step input current
4. Small footprint, low-profile SOIC8 package
5. 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8
6. 5.0 V, single-supply operation
7. 66 to 185 mV/A output sensitivity
8. Output voltage proportional to AC or DC currents
9. Factory-trimmed for accuracy
10. Extremely stable output offset voltage
11. Nearly zero magnetic hysteresis
12. The radiometric output from the supply voltage.

Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD.

General SpecificationCurrent sensor chipACS712ELC-5AOperating Voltage (V)4.5V ~ 5.5V DCMeasure Current Range-5 ~ +5ASensitivity100mV/ALength (mm)32Width (mm)13Height (mm)13.5Weight (gm)5Shipment Weight0.01 kgShipment Dimensions4 × 2 × 2 cm

Please allow 5% measuring deviation due to manual measurement.

Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD.

Documentation:

1. The Useful Introduction_1 from Embedded-lab.
2. The Useful Introduction_2 from Embedded-lab.

Package Includes :

1 x Current Sensor ACS712-5A

Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD.

Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD Dishan Tech BD.

What is the price of Current Sensor ACS712-5A in Bangladesh?

The latest price of Current Sensor ACS712-5A in Bangladesh is BDT 160 You can buy the Current Sensor ACS712-5A at best price from our Dishan Tech BD.or visit Dishan Tech BD.

Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product

Product Images are shown for illustrative purposes only and may differ from the actual product.Dishan Tech BD.