Description

HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino

HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino

• Low current consumption (typical 30 mA)
• CW or pulse operation
• Flat profile
• Long detection range (20 m)
• Supply voltage: 4.75V to 5.25V
• X-Band Frequency: 10.525 GHz
• Minimum Power Output: 13 dBm EIRP.

HB100 Miniature Microwave Motion Sensor is an X-Band Bi-Static Doppler transceiver module. It has a built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, making it ideal for usage in motion detection equipment.

This module is ideal for alarms, motion detectors, lighting control, vehicle speed measurement, and automatic doors. RoboticsBD

Note: Please use a low voltage soldering iron and connect it to a reliable grounding. This device is sensitive to ESD and it may be damaged during soldering. The IF output of the HB100 module is especially sensitive. You can check it for damage using a multimeter in diode mode. The forward voltage drop between IF and GND should be about 0.25 V.  RoboticsBD

Features :

1. Low current consumption (typical 30 mA)
2. CW or pulse operation
3. Flat profile
4. Long detection range (20 m)