MT8870 DTMF Audio Decoder Module

280.00

  • Low power device.
  • DTMF decoder chip.
  • Band-split filter.
  • Digital decoding functions.
  • Modem interfaces.
  • Mobile radios.
Add to Wishlist
Add to Wishlist
SKU: DT-82927 Category:
Ask for More Info

Description

This component is ideally suited to adding dual tone multi-frequency (DTMF) decoding to your project. This detection module interprets the incoming tone and produces a coded output that can be connected to all manner of microcontrollers.

DTMF is commonly found in touch tone devices such as a phone. The tone is a combination of two separate sine waves that produce a unique signal that can be transmitted or heard. When the module receives the signal it is able to decode it and produce a binary output that can be used in other devices. The module shows the state of the signal through onboard LEDs.

As an idea, you can connect up a mobile phone via 3.5mm to 3.5mm cable to the module. Dialing into the phone from a second mobile and then using the keypad will produce the tones on the original phone. The tones in the call can then be interpreted by the module, allowing you to control all manner of projects. The pins are suited to standard sockets with a pin pitch of 2.54mm.

The MT8870 Tone Decoder is a kind of commonly used multi-frequency decode IC product developed by the MITEL company. It is a complete DTMF receiver. After it received the DTMF signal, it will divide the signal into high-frequency group and low-frequency group and send the signal to the digital decoder which can figure out the key value then send it to the outside Bus via four lines( Q1, Q2, Q3, Q4) as the binary form.

Product Images are shown for illustrative purposes only and may differ from the actual product.

 

Features:

  1. Onboard voice input interface
  2. Low power consumption
  3. Internal gain setting amplifier
  4. Onboard LED, it is very convenient to check the output state.
  5. Adjustable guard time
  6.  Central office quality
  7. Onboard 3.5mm input interface
  8. 5 Channel interface
  9. On-board MT8870 frequency decoder chip
  10. Power-down mode
  11. Inhibit mode
  12. Onboard audio input interface
  13. Onboard LED lights for output state indication Complete DTMF Receiver.
  14. Does not require external circuits or wiring, it can be inserted directly into the UNO/MEGA2560/DUE board to use.
  15. 12-Digital outputs decode mobile and fixed telephone keys (0-9, * #). Also, another 4 Digital output(ABCD) can use “DTMF Dial” for Software control.
General Specification
Main Chip MT8870DS
Working voltage 5V
Power Consumption 500mW (MAX)
Type MT 8870 DTMF Tone Decoding Module
Operating Temperature -40-+85 °C
Board Colour Blue
Dimension (LxWxH)mm 27 x 25 x 10
Weight 5g
Shipment Weight 0.02 kg
Shipment Dimensions 3 × 2 × 2 cm

Please allow 5% measuring deviation due to manual measurement.

 

Package Includes:

1 x MT8870 DTMF Audio/Speech Decoding Telephone Module.

Reviews

There are no reviews yet.

Be the first to review “MT8870 DTMF Audio Decoder Module”

Your email address will not be published. Required fields are marked *