-
- Arduino Shield & Module, BMS & Charger, Converter Module
DC DC Step Down Buck Converter Power Supply Module
- ৳286.00
- Features Wide 4.5V to 28V Operating Input Range Up to 92?ficiency Programmable Switching Frequency from 100kHz to 1.5MHz High-Efficiency Pulse Skipping Mode for Ceramic Capacitor Stable Internally Set Current Limit without a Current Sensing Resistor Cycle-by-Cycle Over Current Protection Input Under Voltage Lockout Input Voltage: 4.5V-28VDC Output Voltage: 0.8V-18VDC Continuous Output Current: Max. 3A Perk Output Current: 4A Max. Efficiency:…
- Add to cart
-
- Arduino Shield & Module, BMS & Charger, Converter Module
DC DC Step Down CA-1235 Buck Converter Power Supply Module
- ৳286.00
- Features: This adjustable module uses the United States imported MP1495 chip, synchronous rectifier output. CA-1235 Power supply module converter1.25V 1.5 1.8 2.5 3.3 5V output adjustable 3A 5V-15V input The adjustable module adopts the MP1495 chip imported from the United States, synchronous rectifier output, energy efficiency of more than 90%, non-linear voltage regulator similar to the market. 5-16V 1.25V 1.5V 1.8V…
- Add to cart
-
- ACTUATOR'S & ACCESSORIES, Arduino Shield & Module, DC Gear motor, DC Motors & Wheels, Robotics Parts, Robots
DC Gear Motor
- ৳90.00
- Perfect for robot, projects, and of course you can use it with Arduino! Rated Voltage: 3-6V DC (recommended 5V) Gear Motor rotation speed: 125 RPM Speed without load: 180±10RPM at 6V (no load) Load current: 190 mA (250 mA MAX) continuous, 700mA at no-load start Maximum torque: 800 g. cm min. Stall Current: ~1A Strong anti-interference on this motor keeps…
- Add to cart
-
- ACTUATOR'S & ACCESSORIES, Arduino Board, Arduino Shield & Module, Basic Components, DC Brush Motor, DC Gear motor, Robotics Parts, Robots
DC Gear Motor and Wheel
- ৳175.00
- DC motor specification: Rated Voltage: 3-6V DC. Gear Motor rotation speed: 125 RPM Load current: 190 mA (250 mA MAX). Maximum torque: 800 g. cm min. Wheel specification: Width: 30mm Diameter: 65mm Material: Plastic and rubber Net weight: 65gm (Approx.)
- Add to cart
-
- Arduino Shield & Module, Communication Module, Converter Module
Digital Audio Power Amplifier Board Amp TPA3118 Mono Module
- ৳245.00
- Power amplifier chip: TPA3118 Working Voltage: DC 8-24V Power Output: 1*60W(one Channel, requiring two stereo) Applicable Speaker Impedance: 4-8 ohm Product size: approx. 46*35*11mm/1.81*1.37*0.43'' Net weight: approx. 13g
- Add to cart
-
- Arduino Shield & Module, Communication Module
DT-06 Wireless WiFi Module
- ৳380.00
- DT-06 Wireless WiFi Module
- Add to cart
-
- Arduino Shield & Module
ESP8266 ESP-01 WiFi module (Blue)
- ৳290.00
- Frequency 2.4 GHz Operating Voltage 3.0V ~ 3.6V Supply Voltage ESP8266 ESP-01 Serial WiFi Wireless Transceiver Module Relative Humidity 90 % RH Dimension 16 x 24 x 3.3 mm Working Temperature -40 ~ 125 Deg C Gain + 25 dBm
- Add to cart
-
- Arduino Shield & Module, Sensors
FPM10A Optical Fingerprint Reader Sensor
- ৳3,800.00
- Supply voltage: DC 3.6 ~ 6.0V / 3.3V Supplying Supply Current: Current: <120mA Peak current: <140mA Fingerprint image time: <1.0 seconds
- Add to cart
-
- Arduino Shield & Module
Funduino Joystick Shield V1.A for Arduino
- ৳359.00
- Joystick Shield for Arduino Great experience for game development nRF24L01 Interface Nokia 5110 LCD Interface Bluetooth Interface I2C Interface Compatible with Arduino Operating voltage 3.5V or 5V Color: Red Size: 3.5" x 2.2" x 1.75"
- Add to cart
-
- Arduino Shield & Module, Communication Module
GPRS GSM SIM900
- ৳2,300.00
- Based on SIMCom‘s SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control by AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or…
- Add to cart
-
- Arduino Shield & Module
GPS GSM GPRS SIM808 Module
- ৳3,300.00
- Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep mode.
- Add to cart
-
- Arduino Shield & Module
I2C Display Module
- ৳110.00
- Specification: I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself) Supply voltage: 5V the backlight and contrast is adjusted by potentiometer Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable Compatible for 1602 LCD 2004 LCD
- Add to cart