-
- DC Motors & Wheels, Motor Controller Module
L298N Dual Motor Controller Module (RED)
- ৳195.00
- Operating Voltage: up to 46V Total DC Current: up to 4A On-Board 5V regulator, LM7805 able to provide current up to 500mA-1000mA Maximum Power: 24W Peak Non-Repetitive Output Current (t = 100µS) : 3A Peak Repetitive Output Current (80% ON, 20% OFF, tON=10mS) : 2.5A Peak Continuous Output Current : 2A Typical Logic Supply Voltage : 5V Maximum Supply Voltage : 46V…
- Add to cart
-
- DC Motors & Wheels, Motor Controller Module
L298N Motor Driver (Green)
- ৳349.00
- This module integrates a built-in 5V power supply. When you drive voltage of 7V-35V can onboard 5V logic supply, do not input voltage when using onboard 5V power supply, the +5 V power supply interface, but leads to 5V voltage for external use When ENA is HIGH, IN1 IN2 control OUT1 OUT2 When ENB is HIGH, IN3 IN4 control OUT3…
- Add to cart
-
- Motor Controller Module
Mini PWM 5A 90W PWM 12V DC Motor Speed Controller Module
- ৳140.00
- Mini PWM 5A 90W PWM 12V DC Motor Speed Controller Module
- Add to cart
-
- Arduino Shield & Module, Motor Controller Module
Motor Driver – Dual TB6612FNG
- ৳410.00
- CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
- Add to cart
-
- DC Motors & Wheels, Motor Controller Module
PICkit 3 PIC Microcontroller Programmer
- ৳5,299.00
- • USB (Full speed 12 Mbits/s interface to host PC) • Real-time execution • MPLAB IDE compatible (free copy included) • Built-in over-voltage/short circuit monitor • Firmware upgradeable from PC/web download • Totally enclosed • Supports low voltage to 2.0 volts (2.0v to 6.0v range) • Diagnostic LEDs (power, busy, error) • Read/write program and data memory of microcontroller •…
- Add to cart
-
- Arduino Shield & Module, Motor Controller Module
Regular Motor Driver 43A BTS7960
- ৳650.00
- Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.
- Add to cart
-
- Sale!
- DC Motors & Wheels, Motor Controller Module, Servo Motor
Servo Tester
- Original price was: ৳320.00.৳295.00Current price is: ৳295.00.
- Operating Voltage: DC 4.2-6.0v Output: Less than 15mA (5.0) Output Signal: 1.5ms ± 0.5ms Simultaneous Servo Test: 3 LED Mode Indicators: Manual / Neutral / Auto Testing Capabilities: Response Time / Neutral Position / Max Angles Size: 46mm x 32mm x 17mm (Approx.) Weight: 8g
- Add to cart
-
- DC Motors & Wheels, Motor Controller Module
TB6612FNG Dual Motor Driver
- ৳559.00
- Power supply voltage: VM = 15V max, VCC = 2.7–5.5V Output current: Iout = 1.2A (average) / 3.2A (peak) Standby control to save power CW/CCW/short-brake/stop motor control modes Built-in thermal shutdown circuit and low-voltage detecting circuit All pins of the TB6612FNG broken out to 0.1" spaced pins Filtering capacitors on both supply lines Dimensions: 0.8x0.8" (LxB)
- Add to cart
-
- DC Motors & Wheels, Motor Controller Module
Water Level Control Switch
- ৳279.00
- Long-lasting life Easy to use Contact Rating: 10 W. Switching Voltage: 220 V. Switching Current: 0.5 A. Breakdown Voltage: 220 VDC. Carry Current: 1 A. Contact Resistance: 100 m?.
- Add to cart
